Professional Documents
Culture Documents
QM-HSSE Dept.
Procedure Reference: Remove & Install mud tank agitator SJA No.: M-45 RIG: 53
SJA Form
Rev. 06/AUG16
Egyptian Drilling Company
QM-HSSE Dept.
4-Workers enter the tank. 1-Worker slipping off ladder. Personal Injury 1- Appointed watch man.
2-Worker slipping on the tank 2- Max time for the man inside the
floor. tank should be one hr.
3-Workers inhale gasses. 3- Washing of ladder before entering.
4--Tripping Hazard. 4- Wear rubber boots and rubber
Senior mechanic
gloves.
5- Wear safety harness.
6- Apply LOTOTO system.
7- Watch steps during descending.
8- Use good condition foot wear.
5-Remove bolts of main shaft flange & bolts of 1-Worker slipping on the tank Personal Injury -Max time for man inside the tank
agitator base. floor. should be one hour.
2-Worker inhale gasses. 2-Wear safety harness.
3-Tank environment measured & Senior mechanic
monitored.
4-Use Proper PPE
5-Use proper tools
6-Remove the agitator by using crane. 1-Agitator damaged. Personal Injury 1-Worker inside tank goes out the
2-Agitator hit workers. Material damage tank before start loading the agitator.
2-Use tag line. Senior mechanic
SJA Form
Rev. 06/AUG16
Egyptian Drilling Company
QM-HSSE Dept.
Comments and Conclusions: Inadequate procedure/Deviation from standing procedure to be highlighted and additional recommendations listed
Task Team Leader shall answer the below questions before approving the SJA:
This SJA is a new or a revised SJA? Have changes been made to the original
New Revised YES NO
SJA?
In case of a revised SJA: Have all the significant hazards, controls
Are there any changes in the conditions or job steps? YES NO and responsibilities involved with the work YES NO
been identified by the preparation team?
Are there any modifications that require MOC?
YES NO
If yes please attach a copy of the MOC
N.Mech
HSE
Reviewed By: Team Leader (Work Group Supervisor/PA) Approved By: PIC
Name: Name:
Signature Signature
Date: Date:
SJA Form
Rev. 06/AUG16