Professional Documents
Culture Documents
FPSO
TAGGING
PROCEDURE
C2 25-Mar-2021
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad
REVISION HISTORY
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Table of Contents
OBJECTIVE.......................................................................................................................... 5
SCOPE ................................................................................................................................. 5
2.1 NEW ITEM ................................................................................................................ 5
2.2 REPAIR, LIFE EXTENSION AND CONVERSION ..................................................... 5
REFERENCES / RELATED PROCEDURE .......................................................................... 5
DEFINITIONS / ABBREVIATIONS ....................................................................................... 6
RESPONSIBILITY ................................................................................................................ 7
5.1 PROJECT DIRECTOR .............................................................................................. 7
5.2 ENGINEERING PROJECT MANAGER ..................................................................... 7
5.3 PRINCIPAL AND LEAD ENGINEER ......................................................................... 7
5.4 PRINCIPAL AND LEAD ENGINEER (INSTRUMENT) ............................................... 7
5.5 PRINCIPAL AND LEAD ENGINEER (TELECOMMUNICATION) ............................... 7
5.6 PRINCIPAL AND LEAD ENGINEER (ELECTRICAL) ................................................ 7
IDENTIFICATION OF EQUIPMENT ..................................................................................... 8
6.1 EQUIPMENT TAGGING FORMAT ............................................................................ 8
6.2 EQUIPMENT FUNCTION AND SUPPORT FUNCTION (DD) .................................... 8
6.3 AREA, SYSTEM & UNIT CODE (BBCC) ................................................................... 9
6.4 SEQUENCE NUMBER (ZZ) ...................................................................................... 9
6.5 IDENTICAL EQUIPMENT CODE (F) ......................................................................... 9
6.6 EXAMPLES OF THE 2-LETTER CODES .................................................................. 9
6.7 EQUIPMENT NUMBERING OF PACKAGE UNIT ..................................................... 9
IDENTIFICATION OF PIPING............................................................................................. 10
7.1 PIPING TAGGING FORMAT ................................................................................... 10
7.2 NOMINAL DIAMETER (NNN) .................................................................................. 10
7.3 SERVICE AND FLUID CODE (SS) .......................................................................... 10
7.4 AREA, SYSTEM & UNIT CODE (BBCC) ................................................................. 12
7.5 LINE SEQUENCE NUMBER (ZZZ) ......................................................................... 12
7.6 APPLICATION OF PIPING CLASSES ..................................................................... 12
7.7 PRESSURE, MATERIAL AND PIPING IDENTIFIER ............................................... 12
7.8 INSULATION CODE (QQ) ....................................................................................... 13
7.9 INSULATION THICKNESS (TTT) ............................................................................ 13
IDENTIFICATION OF VALVE (MANUAL) .......................................................................... 14
8.1 MANUAL VALVE TAGGING FORMAT .................................................................... 14
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
OBJECTIVE
The purpose of this procedure is to provide guidelines for tagging of equipment, piping,
instrument and electrical item for Mero 3 project, to be used throughout the project duration
to ensure systematic control and traceability.
SCOPE
This procedure applies for Mero 3 related items installed by OWNER and all the Project
CONTRACTORS such as Aker Solutions, Siemens etc.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
DEFINITIONS / ABBREVIATIONS
Terms Definitions
COMPANY shall mean PETROBRAS
CLASSIFICATION SOCIETY
shall mean Det Norske Veritas Germanischer Lloyds (DNVGL)
(CLASS)
shall mean MISC OFFSHORE (SINGAPORE) PTE. LTD and shall include its
OWNER
successors in title and permitted assignees.
shall mean OWNER, MISC and its subsidiaries, OWNER’s client, AFFILIATE,
OWNER’s other contractors and its, and their respective officers and
employees (including agency personnel), and other individuals, whether
OWNER GROUP
employees, or not, under the respective control of such parties and directly
engaged in the implementation of this CONTRACT, but shall not include any
member of the CONTRACTOR GROUP.
shall mean the legal entity identified in the preamble of the CONTRACT
CONTRACTOR FORM that is responsible for the performance of the WORK under the
CONTRACT and shall include its successors in title and permitted assignees.
shall mean the CONTRACTOR, its SUBCONTRACTORS of any tier, its and
their AFFILIATES and its and their respective officers and employees
CONTRACTOR GROUP (including agency personnel) and other individuals, whether employees, or
not, under their respective control and engaged in the WORK or otherwise at
the SITE, but shall not include any member of OWNER GROUP
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
RESPONSIBILITY
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
IDENTIFICATION OF EQUIPMENT
DD - BB CC ZZ F
Equipment Function Area, System & Unit Code. Consists of two- Consists only one-
Code. digit sequence letter code to denote
number assigned identity of equipment
from 01 to 99 for items used for the
each system same purpose.
Equipment Type Area Code System & Unit Code Sequence / Train Identically
No
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
IDENTIFICATION OF PIPING
Example: 200-PG2020-0001-01CS2010-A040
200 - PG 2020 - 0001 - 01 CS 2010 - A 040
PG = Process 20 = Topside Sequence 01 = CS = 20 = A= 040 = 40
Gas 20 = 0001 for 150# Carbon Topside Acoustic mm
Separation & system Steel 1 = 1.5 mm Insulation
Stabilization 20 CA
0 = Non-
Sour
NOTE:
1. For FPSO and FSO, a location code may be inserted between in front of the fluid code. The location code shall be defined by MISC.
2. MISC to define the usage of DN or NPS.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Service Fluid
Fluid Type Description
Code (S) Code (S)
A Air A Atomizing Air
C Combustion Air
I Instrument Air
P Purge Air
S Starting Air
U Utility / Service Air
B Blowdown / Relief H High Pressure
L Low Pressure
C Chemical A Anti-Foam Inhibitor
B Biocide Inhibitor / Anti Marine Growth
C Corrosion Inhibitor
D Demulsifier
E Ethanol
F Fire Fighting Foam
G Glycol
H Sodium Hypochlorite
I Chemical Injection
K Catalyst
L Oxygen Scavenger
M Methanol
O CO2 Gas
P Hydrate Inhibitor (Polyelectrolyte)
S Scale Inhibitor
W Wax Inhibitor
X Degreaser
D Drain B Bilge Drain
C Closed Drain
H Hazardous (Open) Drain
L Laboratory Drain
N Non-Hazardous (Open) Drain
S Sewage / Sanitary Drain
W Potable Water Drain
F Fuel A Aviation Fuel
G Fuel Gas / Seal Gas
L MDO / MGO
H HFO
G Gas E Exhaust Gas
H Hydrogen Gas
I Inert Gas
N Nitrogen Gas
O Oxygen Gas
M Medium C Cooling Medium
H Heating Medium (Hot Oil, Hot Water, etc)
O Oil L Lube Oil
H Hydraulic Oil
P Process L Process Liquid (Oil)
G Process Gas
M Process Mixed Phase
W Process Washing (COW)
R Refrigerant F Refrigerant (General)
S Steam H HP Steam
L LP Steam
M MP Steam
W Condensate (Steam)
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Service Fluid
Fluid Type Description
Code (S) Code (S)
V Vent A Vent Atmospheric
F Vent Flare
W Water B Ballast Water
C Chilled Water
E Feed Water
F Firewater
H Hot Water (Fresh)
I Injection Water
S Seawater
T Tempered Water
U Utility Water (Fresh) / Service Water
X Slop Water
Z Potable Water
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
b) Marine System Pipe Class and Material Specification (Doc. No. MR3-AKER-MSE-SPN-
3000ZZ-30002)
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
BBCC - MV - ZZZZ
BB = Area, Manual Valve Sequence Number
CC = System & Unit Code (0001 to 9999)
Refer Appendix 1
Example: 2020-MV-1002
2020 - MV - 1002
20 = Topside Manual Valve Sequence no. 1002 for system 20
20 = Separation & Stabilization
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
1
Filter / Strainer in-line piping only, inclusive of Y-Strainer, Cone / Temporary Strainer, Tee Strainer &
Basket Strainer.
2
Refer to project specific P & ID legend sheet for reference
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
IDENTIFICATION OF INSTRUMENTATION
All field instrumentation and fire and gas devices shall be identified based on the format
specified herein. The intent is for all field instruments and fire and gas devices to be
uniquely tagged, with a secondary objective of making the tags logical and consistent for
human pattern recognition of relationships and functions.
2020 - PT - 0001
20 = Topside P = Pressure Sequence 0001 of the System
20 = Separation & T = Transmitter 20
Stabilization
Example:2020-PCV-0001A, Pressure Control Valve for Separation & Stabilization, with split
range function
2020 - PCV - 0001 A
20 = Topside P = Pressure Sequence 0001 of the System Split range Unit A
20 = Separation & C = Control 20
Stabilization V = Valve
Note: The loop number is 2020-P-0001
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Sensor (Primary
E Voltage
Element)
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Positioner Relay or
Y User’s Choice Y Axis
Solenoid Compute
Emergency, Driver,
Safety Actuator,
Z Position, Dimension Z Axis, Instrumented Unclassified
System, Final Control
FGS Element
Notes:
For full explanation of terms and symbols used on this table, refer to instrument Society of
America Standard – ‘Instrumentation symbols and Identification’ (ANSI / ISA S5.1)
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Important Notes: -
Specific fire and safety function identifiers for facility or project, user or CONTRACTORs
may propose new code with approval from MISC.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Example 3: Indoor Unit Control Panel for Gas Compression Skid-B located in E-
House: 2023-UCP-18001
2023 - UCP - 18001
20 = Topside UCP = Unit Control Panel 1 = Port Side
23 = Gas 80 = Module 80 Sequence unit no. 01
Compression of Compression Skid
and Re-Injection
Note 1:
Local Panel (LP) to be used for local panel without electronics or active device.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Description Code D
Ex’d’ (Flameproof) D
Ex’e’ (Increased Safety) E
Ex’i’ (Intrinsic Safe) I
Ex’n’ (Non-Sparking) N
Ex’p’ (Pressurized) P
Ex’op’ (Optical Radiation) O
Non-Ex Z
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Description Code C
Core Cable Fire Resistant RF
Core Cable IS RB
Core Cable R
Pair Cable Fire Resistant SF
Pair Cable IS SB
Pair Cable S
Power Cable P
Power Cable Fire Resistant PF
System (Serial, Ethernet, Profibus, etc) I
System Cable Fire Resistant IF
Optical Cable O
Optical Cable Fire Resistant OF
Coax Cable C
Coax Cable Fire Resistant CF
Composite or Special Cables X
Tubing T
- 6Mo MO
- SS SS
- SDD SD
- Hastelloy HT
- Inconel IC
Area & System - Field Devices Identifier -ZZZZZ-C (See example 1 below)
Instrument Cable
Identifier Format
Area & System - Field Devices Identifier -ZZZZZ-A-C (See example 2 below)
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Example 1 – Instrument cable tag for pressure transmitter on topside Separation &
Stabilization Module connected to skid instrument junction box:
‘2020-PT-0001-S’
Additional
2020 - PT-0001 - Sequence - Cable Type, S
Number
20 = Topside PT-0001 = Instrument cable tag for Single run does S = Pair Cable
20 = Separation pressure transmitter from not require
& Stabilization Separation & Stabilization to numbering
Junction Box
Example 2 - Instrument cable tag from Junction box connected to ICSS marshalling cabinet:
‘2020-JBE-12001-A-S’
2020 - JBE-12001 - Sequence No. - S
20 = Topside JB = Junction Box A = Cable A S = Pair Cable
20 = Separation E = Ex’e’ (Increased Safety) from Junction
& Stabilization 1 = Port Side Box
20 = Module 20
01 = Sequence no. 01
Example 3 - Cable for Instrument equipment, from Indoor Unit Control Panel for Gas
Compression Skid-B to ICSS:
‘2023-UCP-18001-B-R’
2023 - UCP-18001 - B - R
20 = Topside UCP = Unit Control Panel B = Sequence R = Core Cable
23 = Gas 1 = Port Side no. for cable
Compression 80 = Module 80
and Re-Injection 01 = Sequence unit no. 01 of
Compression Skid
The ferrule / wire identification shall follow the instrument tag number with core numbering
in conventional wiring method and for foundation fieldbus wiring method, the ferrule / wire
identification shall follow the cable number with core numbering.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
2020-P-0001
2020 - P - 0001
20 = Topside,
P = Pressure Control Loop Sequence No. 0001
20 = Separation & Stabilization
2020-PZ-0001
2020 - PZ - 0001
20 = Topside,
PZ = Pressure Safety Loop Sequence No. 0001
20 = Separation & Stabilization
2070-GDS-18001
2070 - GDS - 18001
20 = Topside,
GDS = H2S Gas Detector Loop Sequence No. 18001
70 = Fire & Gas
2023-UCP-0001
2023 - UCP - 0001
20 = Topside
23 = Gas Compression and Re- UCP = UCP Interface Loop Sequence No. 0001
Injection
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Electrical equipment tagging is categorized with format no.1 and format no.2. Optional
electrical equipment identifier is added to the equipment tag number to specifically define
main electrical equipment. Refer both format for identification of electrical equipment.
Electrical Equipment
EEE-BBCCZZF
Identifier Format No. 1
EEE - BBCC ZZ F
Electrical Equipment BB = Area Code, Consists of two-digit Consists only one-letter
Code. CC = System & Unit Code sequence number code to denote identity of
assigned from 01 to equipment
Can be one, two or 99 for each system items used for the same
three letters purpose. (A, B, C..)
Example: NER-208801
NER - 2088 01
NER = Neutral Earthing 20 = Topside, Sequence no. 01 for
N/A
Resistor 88 = Earthing and Lightning system RE-88
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Electrical Equipment
EEE-EEE-BBCCZZF
Identifier Format No. 2
Example: VFD-PM-202001
VFD - PM-202001
PM=Pump Motor
20=Topside
VFD= Variable Frequency Drive
20=Separation & Stabilization
01=Sequence No of system 20
Equipment Functional code - refer to Appendix 2. Take the main code, e.g. A, P, K etc.
M = Motor
BBCC = Appendix 1 (follow equipment)
Example:
Mechanical equipment (Pump): PA-202001
Electric motor: PM-202001
It should be the same concept for electric generator coupled to gas turbine unit.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Electrical Cable
Electrical Equipment Tagging-C-ZZZ
Identifier Format
Electrical Equipment
- C - ZZZ
Tagging
(Section 14 Identification of Consists of three-digit sequence number
Cable function code
Electrical Equipment) assigned from 001 to 999 for each system
For single core cable, denote with A / B / C after the
Refer Table 31 & Table 34 Refer Table 37
sequence number
Example: PM-202001-P-001
PM-202001 - P - 001
Sequence power cable no. 001 for
P= Power Cable of Main Feed
equipment PM-201001
Example: VFD-PM-202001-P-001
VFD-PM-202001 - P - 001
Sequence No. 001 for equipment
P=Power Cable of Main Feed
VFD-PM-201001
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Electrical Equipment
- EE - ZZZ
Tagging
Consists of three-digit sequence
(Section 14 Identification of Electrical Bulk Code.
number assigned from 001 to 999
Electrical Equipment) Can be one or two letters
for each system
Refer Table 31 & Table 34 Refer Table 32
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
APPENDICES
Description Code
General 10
Topside 20
Hull and Marine 30
Mooring, Turret 40
Subsea, Umbilical, Riser, Flowline (SURF)
50
*from seabed upwards to lower interface with riser balcony
General 00
01
02
03
(00-09)
Reserved to system 04
that are specific to a 05
particular plant
06
07
08
09
Drilling 10
Drilling Process 11
Drilling Well Control 12
(10-19)
Drilling, Well and Riser and Well Topside 13
Subsea Related Drilling Control and Monitoring 14
Systems
Drilling Drain 15
Well and Riser Subsea 18
Subsea Installation – Maintenance and Work Over 19
Separation and Stabilization 20
(20 – 29) Crude Handling and Metering 21
Main Process Systems Flash Gas Compression 22
Gas Compression and Re-Injection 23
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Gas Treatment 24
Gas Conditioning 25
Carbon Dioxide (CO 2) Compression 26
Gas Export and Metering 27
Gas Sweetening 28
Water Injection 29
Oil Export Line 30
Condensate Export Line 31
Gas Export Pipeline 32
Oil Storage 33
(30 – 39) Injection Water Pipeline 34
Export and byproduct
Handling Chemical Injection Pipeline 35
Wellstream Pipeline 36
Gas Injection Pipeline 37
Glycol / Methanol Regeneration 38
Loading 39
Cooling Medium 40
Heating Medium 41
Chemical Injection 42
Flare 43
Oily Water 44
Fuel Gas 45
Methanol Injection 46
Chlorination 47
(40 – 69) Sea Water 50
Process Support and
Utility Systems Ballast Water 52
Fresh Water 53
Steam 55
Open Drain 56
Closed Drain 57
Thruster and Propulsion 58
Lubrication Oil 59
Jet Fuel 61
Marine Fuel (Diesel, HFO / IFO) 62
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
Compressed Air 63
Inert Gas 64
Hydraulic Power 65
Sewage Treatment 66
Package Unit Instrumented System 67
Process Control Instrumented System 68
Safety Instrumented System 69
Fire and Gas Detection 70
Fire Water 71
Fire Fighting 72
(70 – 79) Material Handling 73
Safety Systems Life Saving 74
Passive Fire Protection 75
Emergency Preparedness 76
Environment Protection 77
Main Power (u > 6.6 kV) 80
Main Power (1.0 kV < u = < 6.6 kV) 81
Main Power (u = or < 1.0 kV) 82
Emergency Power (u = or > 1.0 kV) 83
(80 – 89)
Emergency Power (u < 1.0 kV) 84
Electrical
Battery and No-Break 85
Telecommunication 86
Control 87
Earthing and Lightning 88
Topside Structure 90
Sub Structure 91
Temporary 92
Architectural Incl. Workshop and Storage 93
(90 – 99)
Structural, Civil, Marine Mooring and Positioning 94
and Architectural Onshore / Civil 95
Systems
Subsea Structure and Template 96
HVAC 97
Corrosion Protection 98
Area Completion 99
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.
F.I. Description
SV Solenoid Valve
WV Wing Valve
Note:
Additional identifiers may be added to indicate special requirements:
NC - Normally Closed
NO - Normally Open
FB - Full Bore
CSC - Car Sealed Closed
CSO - Car Sealed Open
FC - Fail Closed
FO - Fail Open
LC - Locked Closed
LO - Locked Open
TSO - Tight Shut Off
MISC Berhad reserves all rights to this documented information. The contents of this documented information are strictly confidential and must not be copied, reproduced, distributed,
altered, disclosed or stored in a retrieval system at any time without prior written consent of MISC Berhad.