Reinforced Concrete design according to ACI 318-19
Development & Splice of Reinforcement
Project :
Concrete Cyl. strength f c` = 40 MPa
Steel Yield stress fy = 420 MPa
Development of Straight bars in tension:
Bar surface condition: Uncoated or galvanized e = 1 Casting position: Other bar positions t = 1 Reinforcement grade: Grade 280 or Grade 420 g = 1 Spacing and cover: Clear spacing not less than db, clear cover at least db and stirrups throughout ld not less than Code minimum Development Length, Ld = 32 db for db 12 = 384 mm Clause 25.4.2.1
Lap splice in tension:
As,provided / As,required = <2 Percent of spliced bars = More than 50% Splice type: Class B Splice Length, Lst = 42 db for db 12 = 504 mm Clause 25.5.2.1
Development of Straight bars in compression:
Confinement condition: Other cases T r = 1 Development Length, Ldc = 19 db for db 12 = 228 mm Clause 25.4.9.1
Lap splice in compression:
Splice Length, Lsc = 30 db for db 12 = 360 mm Clause 25.5.5.1
Page 1 of 2 Reinforced Concrete design according to ACI 318-19
Development & Splice of Reinforcement
Standard hooks in tension: Bar surface condition: Uncoated or galvanized e = 1 Location: Other conditions o = 1.25 Confinement reinforcement: Other conditions r = 1.6 Concrete strength: For fc′ < 42 MPa c = 0.98 Ldh = for db 12 = 235 mm Clause 25.4.3.1 Lext = 12 db for db 12 = 144 mm 90-degree hooks