Professional Documents
Culture Documents
CALCULATION FOR GUTTER AND DOWN PIPE-Pipe
CALCULATION FOR GUTTER AND DOWN PIPE-Pipe
A Data:
a 0.25 m Average width of gutter
h 0.21 m Depth of gutter
m 0.84 Depth/width ratio of gutter
W 15.60 m Width of area being drained for buildings using
A 153.86 cm2 Area of downspout
I 200.00 mm/hr Maximum rainfall intensity (milimet/hour)
C 1.00 Roof slope constant ( =1 for roof slope from 0.0/10 to 2.0/10)
D 14 cm Diameter of downspout
B 15.6 m Column bay
B Result of calculation:
Base on dimension of above gutter and downspout, distance between of each column
will be calculated as follows:
440×A
DS =
CWI
DS 21.70 m > Column bay = 15.6 m
440×A
DS =
CWI
DS 8.97 m > Khoảng cách 2 ống xối = 6 m
(milimet/ giờ)
( từ 20% trở xuống lấy bằng 1)
hoảng cách giữa các ống xối sẽ được tính theo hai
ống xối = 6 m
ống xối = 6 m
ng xối là đủ
CALCULATION FOR GUTTER AND DOWNSPOUT
PROJECT: HVC BINH DUONG NEW FACTORY
LOCATION: BINH DUONG PROVINCE, VIETNAM
12 12
where
R 0.25 m Width of roof to be drained (ft)
L 0.21 m Length of gutter to be drained (ft)
I 0.84 Rainfall intensity in inches/hr with a 5 minute duration (in/hr)
d 15.60
m Gutter depth (in)
w 153.86
cm2 Gutter width (in)
T 200.00
mm/hr 1, if downspout is located at end of gutter length to
2, if downspout is located at end of gutter length to be drained
Basic equation for rectangular downspout capacity:
I×R×L
1.0
1200 × A
where
A 1.00 Cross sectional area of downspout (in2)
For common usage these equations can be expressed as follows:
For gutter capacity:
5 13
28
W 7 D 7 43200 14
3 4
× ×
12 R×I T
L
12
0.481 × 2
D 14 cm Diameter of downspout
B 15.6 m Column bay
B Result of calculation:
Base on dimension of above gutter and downspout, distance between of each column
will be calculated as follows:
440×A
DS =
CWI