Professional Documents
Culture Documents
14 - 3al 42912 Aaaa Tnaaa
14 - 3al 42912 Aaaa Tnaaa
AAXX
not permitted without written authorization from Alcatel.
document, use and communication of its contents
All rights reserved. Passing on and copying of this
1 Function
This subrack has 17 positions for plug-in units and can be equipped with the necessary
units to build up to 3 complete first order multiplexer systems.
DOCC: *NA
MMCC: *NA
20031010
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
3 Subrack equipment
The subrack is equipped as follows :
1 (main) ringer/power unit in position 9;
1 redundant ringer/power unit in position 10 (option);
1 integrated line test unit ILTAUS in position 11 (option, from Release 4.X);
1 CNCC unit in position 16 (option);
1 Q1 extension unit QEXA in position 17;
the other positions can be equipped with the necessary units to build up to 3
multiplexer systems, as indicated below.
Test
2 connectors for the through-connection between subracks of the test bus (daisy-chain
principle) :
01 : Not connected
06 : Not connected
02 : SL3 : Signal 3
07 : Not connected
03 : SL4 : Signal 4
08 : Not connected
04 : Not connected
09 : Not connected
05 : Not connected
Meaning :
TPCM system : Signal 3 - 4 : not connected
SPCM system :
Signal 3 : TBA : test bus A-wire
Signal 4 : TBB : test bus B-wire
LMP
Not used
Q2
Not used
PS
Power supply connector, connected to the power distribution via a connection cable 3AL
42732.
CLK 123
F X264
A
X266
Master Slave
E S678
S301 S401
D 1 1
2 2
3 3
4 4
5 5
GND 6 6
7 7
Open OUT IN 8 8
S246 ON S402ON
S7001 75Ω 120Ω 120 75Ω S302
S268 Ω
1 1
S286 S262 3
2 2
3
4 4 B
S285 ON ON
C S222 S524
S510
S221 64K 1200
Value Value
8 1 1 5
24 2 2 6
S302 0 3 3 7 S402
16 4 4 8
Value Value
8 1 1 5
24 2 2 6
S302 0 3 3 7 S402
16 4 4 8
the 1st address belongs to the PCM controller unit in position 4 (1st multiplexer) and
the main ringer power unit RGPA in position 9;
the 2nd address belongs to the PCM controller unit in position 5 (2nd multiplexer) and
the redundant ringer power unit RGPA in position 10, if provided;
the 3rd address belongs to the PCM controller unit in position 15 (3rd multiplexer);
the 4th address belongs to the ILTAUS unit is position 11 (option, from Release 4.X).
Value Value
8 1 1 5
24 2 2 6
S302 0 3 3 7 S402
16 4 4 8
Note Slave PCM controller units in other subrack positions can not be addressed.