Professional Documents
Culture Documents
Rebar Checklist
Rebar Checklist
Pre-Inspection Final-inspection
Checked
Item # CHECKLIST DESCRIPTION Checked Method Contractor o Pre - Acceptance o Final - Acceptance
Submittals
Corrective Action
Pass Fail Pass Fail DUE DATE
Plan | Remarks
A. REINFORCING BARS
Visual/ Verify/
A4.3 Total Quantity of rebars per schedule o o o o o
Measurement
Minimum clearance distance between bars is equal
Visual/ Verify/
A4.4 to nominal diameter of bar but not less than 1 o o o o o
Measurement
inch
Visual/ Verify/
A4.8 Reinforcement is adequately supported o o o o o
Measurement
B. OTHERS
Review/ Verify/
Check Structural Designer Approved Rebar Cutting List/
B.1 Record o o o o o
Schedule
Measurement
Review/ Verify/
Check Approved attached i.e. Sketches, MS, Materials,
B.2 Record o o o o o
FCD's, Standard Codes, & Specs, Shop drawings, etc..
Measurement
Reason if not accepted: 'Solution for rectification | General Notes, Comments and
QA/QC Engineer
Signature: Signature: Signature:
Date: Date: Date: