Professional Documents
Culture Documents
Name of work- Construction of Mid day meal shed for Govt. Primary School's
Excavation below existing ground/ grade level in all types of ordinary and hard soil (including
soil intermixed with boulders/kankar and slushy soils) either manually or by mechanical means
including dewatering & shoring as required all loading, transporting and unloading of the
1 soils/excavated material to stacks or depositing in low laying areas by spreading in uniform
layers within a lead of 500 meters including all lifts & crossings etc. all complete as per
specification, drawing & direction and of the Engineer in charge. Depth of excavation will be
measured from ground/grade level.
Backfilling in layers compacted to 90% proctor density in areas including all labour material
2 equipment for all leads and lift etc. all complete as per specification, drawing & direction and of Cum
the Engineer in charge.
Total Excavation Cum 39.86
Less PCC quantity Cum -1 5.89 -5.89
Less RCC quantity below GL
For Main column foundation raft Cum -8 1.00 1.00 0.250 -2.000
For slope portion Cum -8 1.00 1.00 0.050 -0.400 Avg ht 50 mm th
For Main column up to + 200 from floor Cum -8 0.23 0.23 0.850 -0.360
Less Brick work below GL
For Sitting bench 4 row Cum -24 0.300 0.23 0.3 -0.50
For dining table 2 row center span portion Cum -10 1.324 0.23 0.3 -0.91
Less for dining table 2 row cross wall portion Cum -12 0.600 0.23 0.3 -0.50
Less for service table center wall Cum -1 0.790 0.23 0.3 -0.05
Less for service table cross wall portion Cum -2 0.750 0.23 0.3 -0.10
Long outer wall Cum -2 8.600 0.23 0.3 -1.19
Brick wall with steps at short wall both side Cum -2 4.815 0.46 0.3 -1.33
Cum Total 26.63
Cum Say 30.00
Cum
Disposal of excess excavation earth after backfilling beyond initial lead of 500 m up to 1000 m
3 all leads and lift etc. all complete as per specification, drawing & direction and of the Engineer in Cum
charge. Net lead (1000 -500) m = 500 m
Supplying and providing design mix Plain cement concrete (Mix 1:3:6) using well graded 25
mm down aggregates including cost of al materials , labour & equipment at all elevations , leads
5 complete for handling , placing,campacting , curing & also de-watering where ever necessary
-excluding cost of centering etc. all complete as per specification, drawing & direction and of
the Engineer in charge.
For Main column foundation Cum 8 1.15 1.15 0.075 0.79
For dining table at center 2 row Cum 2 8.15 0.75 0.075 0.92
Less for dining table 2 row center span offset portion Cum -20 1.174 0.185 0.075 -0.33
For Service table Cum 1 1.35 0.9 0.075 0.09
Less for service table offset portion Cum -2 0.590 0.260 0.075 -0.02
For long with outer wall Cum 2 8.75 0.38 0.075 0.50
Below Brick wall with steps at short wall both side Cum 2 4.665 0.61 0.075 0.43
Below IPS flooring Cum 1 8.6 5.275 0.075 3.40
Less for column portion Cum -8 0.230 0.23 0.075 -0.03
Less for Sitting bench 4 row Cum -24 0.300 0.23 0.075 -0.12
Less for dining table 2 row center span portion Cum -10 1.324 0.23 0.075 -0.23
Less for dining table 2 row cross wall portion Cum -12 0.600 0.23 0.075 -0.12
Less for service table center wall Cum -1 0.790 0.23 0.075 -0.01
Less for service table cross wall portion Cum -2 0.750 0.23 0.075 -0.03
Cum Total 5.54
Cum Say 6.00
Supplying and providing design mix Reinforcement cement concrete (Grade M-20 grade)
using well graded 20mm down aggregates including cost of all materials , labour & equipment at
all elevations , leads & lifts complete for handling, transporting, mixing, placing, vibrating, curing
6 and also de-watering wherever necessary for foundations, columns, walls, slab -excluding cost
of centering , reinforcement steel etc . all complete as per specification, drawing & direction and
of the Engineer in charge.
For Main column foundation raft Cum 8 1.00 1.00 0.250 2.000
For slope portion Cum 8 1.00 1.00 0.050 0.400 Avg ht 50 mm th
For Main column up to + 200 from floor Cum 8 0.23 0.23 1.350 0.571
For Sitting bench top slab 4 row Cum 4 8 0.30 0.075 0.720
For dining table top slab 2 row Cum 2 8 0.70 0.075 0.840
For Service table top slab 1 no Cum 1 1.2 0.75 0.075 0.068
S.NO. DESCRIPTION Unit No L B H QTY. Remark
Cum Total 4.599
Cum Say 5.00
Providing and Fixing of Formwork of approved quality for cast-in situ, plain or reinforced
concrete work's any type & section including labour, materials, equipments, waste for forms,
7 shoring, strutting, scaffolding, staging, tying, nailing, caulking, bolting, testing, etc. & removal of
form work & staging etc. all complete as per specification, drawing & direction and of the
Engineer in charge.
Providing and Fixing of Ply wood Formwork of approved quality for cast-in situ,
reinforced cement concrete work's any type & section including labour, materials, equipments,
8 waste for forms, shoring, strutting, scaffolding, staging, tying, nailing, caulking, bolting, testing,
etc. & removal of form work & staging etc. all complete as per specification, drawing & direction
and of the Engineer in charge.
Providing and laying Brick masonry with minimum crushing strength 75kg/cm2 in works at
all levels with cement mortar 1:6 including material, scaffolding, placing, curing, raking joints,
etc. complete for wall foundation , supporting walls , partitions etc. all complete as per
10 Cum
specification and drawings and direction of the Engineer in charge at any level and locations and
for any wall shape at proper location and levels shown in the drawing all inserts, pipes,
reinforcement making holes , pockets etc.( inserts, pipes, shall be paid separately).
Providing & laying Neat cement punning 2 mm thick complete including cost of all materials, equipment, labour
12 scaffolding curing etc. complete as per specifications and as directed by the Engineer- in- charge
Sqm
For Sitting bench 4 row 100 mm above floor Sqm 24 1.060 0.1 2.54
For dining table 2 row center span portion 100 mm above floor Sqm 20 1.324 0.1 2.65
For dining table 2 row cross wall portion 100 mm above floor Sqm 12 1.660 0.1 1.99
Less for service table center wall 100 mm above floor Sqm 2 0.790 0.1 0.16
Less for service table cross wall portion 100 mm above floor Sqm 2 1.960 0.1 0.39
S.NO. DESCRIPTION Unit No L B H QTY. Remark
Brick wall with steps at short wall both side outside vertical portion Sqm 2 4.815 0.6 5.78
Sqm Total 13.51
Say 15.00
Providing and applying three (3) coats of water proof cement paint of approved manufacturer
(snowcem or equivalent approved by the Engineer- in- charge) and in approved shades to
13 plastered surfaces including cleaning and preparing the wall surface, curing etc. at all elevations Sqm
including labour , material , equipment , scaffolding etc. all complete as per specification,
drawing & direction and of the Engineer in charge
For Sitting bench 4 row above skirting Sqm 24 1.060 0.25 6.36
For dining table 2 row center span portion above skirting Sqm 20 1.324 0.525 13.90
For dining table 2 row cross wall portion above skirting Sqm 12 1.660 0.525 10.46
Less for service table center wall above skirting Sqm 2 0.790 0.525 0.83
Less for service table cross wall portion above skirting Sqm 2 1.960 0.525 2.06
Sqm Total 33.61
Say 36.00
Providing and laying IPS flooring 1:2:4 (i cement: 2 sand: 4 grades stone aggregate (using well graded 6
mm down aggregates ) laid in one layer, finished with a floating coat of neat cement, at various
elevations, including cement slurry, finishing, rounding of edges, corners and junctions, glass strips fixing
14 for maintaining the thickness of 50mm, of flooring including preparation of base, laying under bed and Sqm
sheets, stretching, curing, finishing and cleaning, testing, etc. all complete as per specification, drawing
& direction and of the Engineer in charge
Providing and fixing vitrified floor tiles (9mm to 10 mm th) of approved shade and color over
under bed of cement mortar / concrete at all levels and for all kind of works, elevations, on
horizontal and vertical surfaces for all types of work ( skirting, dado, wall lining and facing, tread
and risers etc. including all workmanship, preparation of working drawings, topping, spreading
15 white cement slurry, jointing and joint filling with white cement slurry mixed with color pigment to
match the shade of finishing material, laying to plumb and water level in desired pattern, curing,
rubbing, grinding, polishing, edge molding, and cleaning, testing, providing opening of required size
and shapes, casting in panels, including all labour and materials etc. all complete as per
specification, drawing & direction and of the Engineer in charge
Providing ,Supplying , Fabrication & Erection of MS pipe tubular truss , on the basis of design
drawings furnished by the Owner of different dia medium class MS pipe of approved brand as
per IS 1239 including miscellaneous MS inserts such as MS plates , MS angle ,foundation
bolts, nut washers, cleats, stiffeners, gussets, base plates and all other fixtures including all
total
16 operations such as strengthening, cutting, machining where necessary, grinding, welding, etc. KG nos length unit wt kg/m total wt in kg
length
complete including cleaning and preparing surfaces and providing two coats of approved
synthetic enamel paint over one coat of zinc rich primer etc. all complete as per specification,
drawing & direction and of the Engineer in charge.(All materials like MS pipe, angle & plates
will be scope of the contractor)
MS Plate 10 mm th at top of vertical pipe KG 8 0.04 0.32 78.50 25.12 area = .2x.2=.04
area = .15x.05=.0075
MS Plate 6 mm th at stiffener of top plate KG 24 0.0075 0.18 47.10 8.48
MS Plate 6 mm th gusset plate at center of truss KG 4 0.09 0.36 47.10 16.96 area = .6x.15=.09
MS Plate 6 mm th gusset plate KG 8 0.04 0.32 47.10 15.07 area = .2x.2=.04
MS Plate 6 mm th KG 8 0.015 0.12 47.10 5.65 area = .15x.1=.015
area = .15x.15=.0225
MS Plate 6 mm th for cross tie KG 8 0.0225 0.18 47.10 8.48
MS Plate 6 mm th for truss end cap KG 8 0.015 0.12 47.10 5.65 area = .15x.1=.015
KG Total 960.28
Considered wastage 2% KG 19.21
KG Grand total 979.49
KG Say 980.00
Providing ,Fitting & fixing at all elevation metal cladding with single skin permanently color coated profiled
metal sheet of 0.5 mm thick of approved brand like Tata, Jindal , Loyyed etc. on roof of shed .The item rate
should be including all labours , j hooks , fasterenes,scaffolding ,equipment and & side laps , cuttings of opening, etc.
all complete to include all incidental items not specified above but reasonably implied to completed this work, as per
17 specification, drawing & direction and of the Engineer in charge. (Sheeting area will be measured for billing sqm
purpose )
Providing, Fitting & fixing at all elevation metal ridge sheet 500 mm wide with single skin permanently color
coated profiled metal sheet of 0.5 mm thick of approved brand like Tata, Jindal , Loyyed etc. on roof center
portion . The item rate should be including all labours , j hooks , fasterenes,scaffolding ,equipment and & side laps ,
cuttings of opening, etc. all complete to include all incidental items not specified above but reasonably implied to
18 completed this work, as per specification, drawing & direction and of the Engineer in charge. (Sheeting length will RM 1 9.2 9.20
be measured for billing purpose )
Say 9.50
ABSTRACT OF COST
Name of work- Construction of Mid day meal shed for Govt. Primary School's
Supplying and providing design mix Plain cement concrete (Mix 1:3:6)
using well graded 25 mm down aggregates including cost of al
materials , labour & equipment at all elevations , leads complete for
5 Cum 6.00 6100 36600.00
handling , placing,campacting , curing & also de-watering where ever
necessary -excluding cost of centering etc. all complete as per
specification, drawing & direction and of the Engineer in charge.
Providing & laying Neat cement punning 2 mm thick complete including cost of all
12 materials, equipment, labour scaffolding curing etc. complete as per specifications and Sqm 15.00 45 675.00
as directed by the Engineer- in- charge
Providing and applying three (3) coats of water proof cement paint of
approved manufacturer (snowcem or equivalent approved by the
Engineer- in- charge) and in approved shades to plastered surfaces
13 including cleaning and preparing the wall surface, curing etc. at all Sqm 36.00 65 2340.00
elevations including labour , material , equipment , scaffolding etc. all
complete as per specification, drawing & direction and of the Engineer in
charge
Providing and laying IPS flooring 1:2:4 (i cement: 2 sand: 4 grades stone
aggregate (using well graded 6 mm down aggregates ) laid in one layer,
finished with a floating coat of neat cement, at various elevations, including
cement slurry, finishing, rounding of edges, corners and junctions, glass strips
14 fixing for maintaining the thickness of 50mm, of flooring including preparation Sqm 42.00 350 14700.00
of base, laying under bed and sheets, stretching, curing, finishing and
cleaning, testing, etc. all complete as per specification, drawing & direction
and of the Engineer in charge
Providing,Fitting & fixing at all elevation metal ridge sheet 500 mm wide with single
skin permanently color coated profiled metal sheet of 0.5 mm thick of approved brand
like Tata, jindal , loyyed etc. on roof center portion . The item rate should be including
all labours , j hooks , fasterenes,scaffolding ,equipment and & side laps , cuttings of
opening, etc. all complete to include all incidental items not specified above but
18
reasonably implied to completed this work, as per specification, drawing & direction RM 9.50 250 2375.00
and of the Engineer in charge. (Sheeting length will be measured for billing
purpose )
Total 379430.00
For dining table slab binder bar 8 @ 150mm c/c 2 54 0.65 70.2
For service table slab main bar 6-10 1 6 1.20 7.20
5 For service table slab binder bar 8 @ 150mm c/c 1 9 0.7 6.3
Total Length in mtr. 204.1 450.48 64
Unit weight in kg./mtr. 0.395 0.62 0.89
Weight. in kg. 80.6195 279.2976 56.96
Total weight in KG 416.8771
Total weight in MT 0.417
Considered wastage @5% (MT) 0.021
Gross weight in MT 0.438
Say 0.440