Professional Documents
Culture Documents
15 Cụm Máy Lắp Ghép Tổng Hợp
15 Cụm Máy Lắp Ghép Tổng Hợp
Các bạn muốn học phần mềm gì thì Liên hệ: anh Lê Văn Đức (chủ nhiệm Câu lạc bộ phần mềm)
Sđt/Zalo : 0366 030 217 : Lê Văn Đức
Facebook/Skype : Levanduc Lvd
Wheel Support Assembly 1
Figure 4 Front view of the Wheel Figure 5 Sectioned side view of the Wheel
2 Student Project
Figure 4 Views and dimensions of various components of the Bench Vice assembly
Bench Vice Assembly 3
Figures 5 Views and dimensions of various components of the Bench Vice assembly
1 - KHÓA HỌC AUTOCAD THIẾT KẾ CƠ KHÍ
------------------------------------------------------
Figure 5 Top view of the Arm Figure 6 Sectional front view of the Arm
Figure 1 The completed Double Bearing Figure 2 The exploded view of the Double
assembly Bearing assembly
Figure 3 Top view of the Base Figure 4 Top view of the Cap
Figure 5 Front view of the Base Figure 6 Front view of the Cap
2 Student Project
Figure 7 Dimensions and drawing views of the Bushing and the Bolt
Fixture Assembly 1
Fixture Assembly
Create all the components of the Fixture assembly and then assemble them, as shown in
Figure 1. The details of the components of the Fixture assembly are shown in
Figures 2 through 5.
------------------------------------------------------
Figure 3 Views and dimensions of the Screw, Handle, Movable Jaw, and Handle Screw
Plummer Block Assembly 1
Figure 4 Views and dimensions of Brasses, Nut, Lock Nut, and Bolt
Pulley Support Assembly 1
Figure 6 Left-side view of the Bracket Figure 7 Sectioned front view of the
Figure 8 Dimensions of the Washer, Cap Screw, Turn Screw, and Nut
Pulley Support Assembly 3
Figure 1 The Radial Engine assembly Figure 2 The exploded view of the assembly
Figure 6 Views and dimensions of the Rod Bush Upper, Rod Bush Lower, Piston Pin Plug,
Piston Pin, Piston Rings, and Master Rod Bearing
Shaper Tool Head Assembly 1
Shock Assembly
In this project, you will create all components of the Shock assembly and then assemble
them, as shown in Figure 1. Also create an exploded state of the assembly, as shown in
Figure 2. The dimensions of the components are shown in Figures 3 through 10.
Figure 3 Front and right-side views of the Stock Figure 4 Top and front views of the Adjusting Screw
Support Roller Nut
Figure 7 Views of the Support Adjusting Screw Figure 8 Top and front views of the Thrust
Bearing
V-Block Assembly 1
V-Block Assembly
Create all the components of the V-Block assembly and then assemble them, as shown in
Figure 1. The dimensions of the components are shown in Figures 2 and 2.
Các bạn muốn học phần mềm gì thì Liên hệ: anh Lê Văn Đức (chủ nhiệm Câu lạc bộ phần mềm)
Sđt/Zalo : 0366 030 217 : Lê Văn Đức
Facebook/Skype : Levanduc Lvd