Professional Documents
Culture Documents
Inspection Procedure
OD Chamfer Diameter
This document as well as the information or data contained herein are confidential and shall not be copied, recopied,
reproduced, transmitted, disclosed or distributed to others or otherwise used for any purpose without the express, prior
and written permission of Tenaris Connections AG and/or Hydril Company and/or its affiliated companies ("Tenaris").
This document as well as the information or data contained herein are the exclusive property of Tenaris, and are to be
returned upon request therefore. All rights in proprietary and novel features of the subject matter are expressly reserved
by Tenaris. Recipient’s agreement to the foregoing is indicated by acceptance of this document. Copyrighted 2008 as an
unpublished work. ALL RIGHTS RESERVED.
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0093
OD Chamfer Diameter Revision 01
Page Number 2
1. REVISION HISTORY
Effective
Rev. # Change Referenced Sections Prepared By: Reviewed by: Approved By:
Date
Document Change
Disposition of
Affected Material
Raw Material X
In Process X
Completed X
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0093
OD Chamfer Diameter Revision 01
Page Number 3
2. PURPOSE
2.1 The purpose of this document is to explain how the measurement of the OD chamfer is
performed.
3. PERSONS AFFECTED
4. REFERENCES
5.1 Definitions and Abbreviations are defined in the most current revision of TenarisHydril document
TSH-GP-00.0001.
6. RESPONSIBILITIES
6.1 Responsibilities are defined in the most current revision of TenarisHydril document
TSH-GP-00.0002.
7. PERSONNEL QUALIFICATION
7.1 Personnel qualification is defined in the most current revision of TenarisHydril document
TSH-GP-00.0003.
8. PROCEDURES
8.1 Inspection:
OD chamfer diameter is acceptable if the measured diameter is within limits prescribed on the IR.
For PVD Qualification Document Type Inspection Procedure
Document Number TSH-IP-00.0093
OD Chamfer Diameter Revision 01
Page Number 4
8.3 Records
9. ANNEX