Professional Documents
Culture Documents
Sr No Description Required Tolerance Observation Heat No / MTC No Type of Test Standards Compliance
1 Horizontal Wire Diameter (in mm) 3.00 ± 0.08 mm 3.03 10/M/06/5.5 Physical with Micrometer ASTM A 641 Pass
2 Horizontal Wire-Tensile Strength(in N/mm2) Min 550 Min 550 591 10/M/06/5.5 Physical With UTM As per Customer Req. Pass
5 Vertical Wire Diameter (in mm) 3.00 ± 0.08 mm 2.99 10/M/06/5.5 Physical with Micrometer ASTM A 641 Pass
6 Vertical Wire - Tensile Strength (in N/mm2) Min 550 Min 550 574 10/M/06/5.5 Physical With UTM As per Customer Req. Pass
9 Mesh Size - Horizontal Wires (in mm) 12.7 ± 1.6 12.74 - Physical With Vernier Caliper ASTM F 2453 Pass
10 Mesh Size - Vertical Wires (in mm) 76.2 ± 3.2 77.21 - Physical With Vernier Caliper ASTM F 2453 Pass
11 Panel Height (in mm) 2209.8 ±5 2212 - Physical with Measuring Tape ASTM F 2453 Pass
12 Panel Width (in mm) 3055.6 ±5 3058 - Physical with Measuring Tape ASTM F 2453 Pass
13 Vertical Flat Bar (in mm) 16 X 3 ±1 X ±0.15 16.4 X2 .98 Physical With Vernier Caliper ASTM A6 Pass
14 Diagonal Flat Bar (in mm) 20 X 3 ±1 X ±0.15 20.3 X .98 Physical With Vernier Caliper ASTM A6 Pass
15 Vertical RHS Tube (in mm) 30 X 20 X 1 ±0.5 X± 0.5X ±0.1 30.2 X 20.1 X 1.01 Physical With Vernier Caliper ASTM A500M Pass
20 Thermoplastic Powder Coating Colour RAL 6005 RAL 6005 RAL 6005 42015054 Visual with RAL card ASTM F 2453 Pass
Surface should be
23 Visual Check smooth and free from -- Satisfactory - Visual As per Customer Req. Pass
irregularities
The above information is based on testing at the Factory, Suppliers Test Certificates and Approved ITP/Standards
Prepared By Verified By
Name: Nikunj Marolya Name: Deepak Pawar
Designation: QA/QC Engineer Designation: Senior Engineer
Signature : Signature :