Professional Documents
Culture Documents
P S G
2
تعریف 01
ﯾﮏ وﺳﯿﻠﻪ ﻣﮑﺎﻧﯿﮑﯽ اﺳﺖ ﮐﻪ ﺑﺮاي ﮐﻨﺘﺮل ﺟﺮﯾﺎن ﺳﯿﺎل و ﻓﺸﺎر درﯾﮏ ﺳﯿﺴﺘﻢ ﯾﺎ ﻓﺮآﯾﻨﺪ اﺳﺘﻔﺎده ﻣﯽ ﺷﻮد .ﯾﮏ وﻟﻮ،
ﺳﯿﺴﺘﻢ ﯾﺎ ﻓﺮآﯾﻨﺪ ﺟﺮﯾﺎن ﺳﯿﺎل و ﻓﺸﺎر را ﺑﻮﺳﯿﻠﻪ اﻧﺠﺎم ﯾﮑﯽ از ﻋﻤﻠﯿﺎت زﯾﺮ ﮐﻨﺘﺮل ﻣﯽ ﮐﻨﺪ:
P S G
3
اجزای شیر 02
.1ﺑﺪﻧﻪ ()Body
.2ﮐﻼﻫﮏ ﯾﺎ ﺳﺮﭘﻮش ()Bonnet
.3ﻣﺤﻮر Stem
.4ﻣﺤﺮك ()Actuator
.5آب ﺑﻨﺪ ()Packing
.6ﻧﺸﯿﻤﻨﮕﺎه Seat
.7ﺻﻔحه Disk
.8فنر Spring
.9دریچه ها ()Ports
P S G
4
انواع شیر 02
شیرهای صنعتی از لحاظ شکل و نحوه محدود کردن جریان در انواع مختلف ساخته میشوند:
• رومیان ایdن سdیستم اولیdه را کdه مصdری هdا و یونانیان توسdعه داده بودنdد ،به کار گرفتند و
آdن را به سdطح بعدی رسdاندند .آdن هdا برای ایجاد سdیستم های پیچیده قنات از ترکیبی از
شیرآالت شامdل دریچdه های زاویdه ای ،دوشاخdه و حتdی دیافراگdم اسdتفاده کردند .سdوپاپ ها
از سdرب سdاخته شده انdد ،كdه به گفتdه برخdي چگونگي پديد آمدن كلمdه “لولdه كشي” را
نشان می دهند ،زيرا “ ”plumbusالتين “سرب” است.
• به طور کلdی مصdریان از نخستین تمدن هایdی بودنdد کdه توانستند لولdه کشی را در شهرهای
خود پیاده سdازی کننdد و یdک برنامdه ریزی زمان بندی شده برای جریان یافتdن آب در کانال
ها به وجود بیاورند.
P S G
6
تاریخچه 01
• سdاخت کانال هdا ،سdیستم های آبیاری و هیدرولیdک همگی در دوره رنسانس بسیار
پیشرفت کردند .ایdن پیشرفت هdا شامdل یdک نوع سdوپاپ پیچیده تdر بود کdه اعتبار آن
به شخصیتی بسیار معروف در تاریخ بشر ،لئوناردو داوینچی تعلق دارد.
• پالگیdن های برنdز و برنdج معموالً به عنوان شیرهای توقdف در شبکه های آب و
تأمیdن لولdه های سdاختمانهای عمومdی و خانگی در دوره رومdی مورد استفاده قرار
می گرفت.
• در سdال 1705میالدی ،توماس نیوکامdن اولیdن موتور بخار را اختراع کرد ،یکی
از مهمتریdن شاهکارهای مهندسdی انسان .با ایdن حال ،وی برای تنظیم بخار در
فشار باال به دریچه های جدید و بهبود یافته نیاز داشت.
P S G
6
تاریخچه 01
P S G
4 شیراالت 02
شیdر توپdی یdک شیdر سdریع بازشdو مdی باشد .وقتdی کdه کامال باز اسdت کمdی اغتشاش یا • Ball valve
سdاقه شیdر یdک توپ دارای شکاف را مdی چرخاند .شکاف توپdی مdی توانdد برای باز یا •
بست کامل جریان استفاده شود.
• دقdت شود کdه جهت ایجاد تروتdل اسdتفاده نشود کdه در اینصdورت در صورت وجود
اصdطکاک سdایشی منجر به ایجاد نشتdی در زمان بسته بودن شیdر مdی شود .ایdن شیرها
دارای افت فشار کم و ظرفیت نسبی باالیی هستند.
کاربردهای پیشنهادی:
P S G
4
Ball valve شیراالت 02
کاربـردها:
در کاربردهای شیمیایی مانند اکسیژن ،کلر خشک و اسید هیدروفلور عالی می باشد. •
سایزهای معمول از ½ اینچ تا 12اینچ •
منطبق با فلنچ های کالس 150و300و 600و 900و رده های باالتر که عملکرد شیر توپی را تا فشار .psi 2250تضمین می نماید. •
دماهای عملیاتی که عمدتا وابسته به سیت و سیلیتگ می باشد می تواند تا .F°550رده گذاری شود. •
شیرهای استاندارد منطبق بر ابعاد ASME face-to-faceهستند که از این نظر این شیرها جهت تعویض ساده می باشد. •
مـزایـا:
قیمت پایین •
ظرفیت جریان باال •
ظرفیت های دما /فشار باال •
نگهداری و نشت پایین •
آب بندی خوب با گشتاور پایین •
اتومات سازی تقریبا راحت •
P S G
4 شیراالت 02
Ball valve
معایب:
• تروتلینگ محدود
• مستعد کاویتاسیون
• نامناسب برای سیال دوغابی (بعلت حفره های اطراف توپ و سیت ها)
• دوغاب میdل به انجماد یdا گیdر کردن داخdل حفره هdا میشود کdه منجر به باال
رفتن گشتاور عملیاتی شیر و در برخی موارد منجر به خرابی می شود.
P S G
شیرstem مdه باشیdی داشتd و زانویstraight pipe ه ایdر پروانdاگرقبل از شی
4 ر را بهdد شیdی گیرد نبایdی قرار مdه زانویdی گیرد کdفحه ای قرار مdدر همان ص شیراالت 02
. صورت زاویه دار قرار داد
butterfly valve
Butterfly valves consist of a disc attached to a shaft with bearings used to facilitate rotation.
These are considered high recovery valves, since only the disc obstructs the valve flow path.
The flow capacity is relatively high and the pressure drop across the valve is relatively low.
The butterfly valves are used for limited throttling where a tight shut off is not required. When
fully open, the butterfly creates little turbulence or resistance to flow.
P S G
4 شیراالت 02
butterfly valve
Applications:
• Most economical for large lines in chemical services, water treatment, and fire
protection systems. General sizes available are 2" to 48", although sizes up to 96" are
available from certain manufacturers.
• Due to the valve design, incorporating a small face-to-face dimension and lower
weight than most valve types, the butterfly valve is an economical choice for larger
line sizes (i.e. 8" and above).
• The butterfly valve complies with ASME face-to-face dimensions and pressure
ratings. This enables the valve to be easily retrofitted in line regardless of the
manufacturer
• The ASME pressure classes adhered to by most manufacturers include 150, 300 and
600# allowing a maximum pressure of 1500 psi.
P S G
4 شیراالت 02
butterfly valve
استانداردهای مربوطه:
• AWWA C504 for rubber-seated butterfly valves
• API 609 for lug and wafer type butterfly valves
• MSS SP-69 for general butterfly valves
• UL 1091 for safety butterfly valves for fire protection
services مزایا:
• هزینه و نگهداری پایین
• ظرفیت باال
• کنترل خوب جریان
• افت فشار پایین
معایب:
• نیاز به گشتاور باال برای کنترل جریان
• مستعد کاویتاسیون در جریان های پایین تر
• ناتوانی در هندل کردن مخلوط های دوغابی
• عموما ً در رده شیرهای بی حباب ارزیابی نمیشود ،و حفرهها و مسیرهای نشتی در اطراف
ساقه دیسک ،گیرافتادهای بالقوه برای سیاالت و دوغاب هستند.
P S G
شیرstem مdه باشیdی داشتd و زانویstraight pipe ه ایdر پروانdاگرقبل از شی
4 ر را بهdد شیdی گیرد نبایdی قرار مdه زانویdی گیرد کdفحه ای قرار مdدر همان ص شیراالت 02
. صورت زاویه دار قرار داد
globe valve
Globe valves consist of a movable disk-type element and a stationary ring seat in a generally
spherical body. The valve stem moves a globe plug relative to the valve seat. The globe plug
can be at any position between fully opened and fully closed to control flow through the
valve. The globe and seat construction gives the valve good flow regulation characteristics.
Turbulent flow past the seat and plug, when the valve is open, results in a relatively high
pressure drop, limited flow capacity, and low recovery.
P S G
4 شیراالت 02
globe valve
Applications:
• Suitable for most liquids, vapors, gases, corrosive substances
• General sizes available are 1/2" to 8".
• Pressure limitations are relatively high, ranging from 1480 to 1500 psi,
dependent on
materials of construction, size and temperature.
• Minimum and maximum temperatures are also very broad ranging from -425°F
to
1100°F, depending again on the materials of construction.
• Depending on the specific construction and application, the globe valve may
comply
with ASME class II, III, IV, V or VI shut-off requirements.
• Easily automated and available with positioners, limit switches, and other
accessories
P S G
4 شیراالت 02
globe valve
Advantages:
• Efficient and precise throttling
• Accurate flow control
Disadvantages:
• Low recovery and relatively low coefficient of flow (Cv).
• High pressure drop, higher pump capacity and system wear
• More expensive than other valves
• The sealing device is a plug that offers limited shut-off
capabilities, not always
meeting bubble tight requirements.
P S G
شیرstem مdه باشیdی داشتd و زانویstraight pipe ه ایdر پروانdاگرقبل از شی
4 ر را بهdد شیdی گیرد نبایdی قرار مdه زانویdی گیرد کdفحه ای قرار مdدر همان ص شیراالت 02
. صورت زاویه دار قرار داد
gate valve
Globe valves consist of a movable disk-type element and a stationary ring seat in a generally
spherical body. The valve stem moves a globe plug relative to the valve seat. The globe plug
can be at any position between fully opened and fully closed to control flow through the
valve. The globe and seat construction gives the valve good flow regulation characteristics.
Turbulent flow past the seat and plug, when the valve is open, results in a relatively high
pressure drop, limited flow capacity, and low recovery.
P S G
3 الزامات پایپینگ شیر پروانه ای 02
P S G
3 الزامات پایپینگ شیر پروانه ای 02
P S G
3
TIPS AND TRICKS الزامات پایپینگ شیر پروانه ای 02
P S G
3
TIPS AND TRICKS الزامات پایپینگ شیر پروانه ای 02
8. If you are dealing with a corrosive fluid, choose the valve body and trim material to
match the pump casing and impeller.
9. Velocity is the key to handling abrasive materials. Keep line velocity of about 10 ft/s
for clean liquid. If you have a fluid that is abrasive, keep the velocity as low as
possible, without having the particles drop out of suspension. When dealing with high
pressure drop situations try always to keep the velocities below 0.3 mach on the inlet
pipe, valve body, and outlet pipe.
10. Always sense pressure where you want to control it. Many control valves and
pressure regulators do not function properly simply because they are sensing
pressure at one point and being asked to control it somewhere else.
11. If you use a transducer in a control loop, specify a positioner on the valve. Otherwise
the transducer will rob the actuator of available thrust, and the valve will leak when it
is supposed to shut off.
P S G
3
TIPS AND TRICKS الزامات پایپینگ شیر پروانه ای 02
12. In cavitating fluids “be sure to allow a straight run of downstream pipe after the valve -
even when the control valve has cavitation trim in it”. If there is a pipe "T" or elbow
immediately downstream, the flow will choke out and back up into the valve.
13. Remember that control valves only do what you tell them to. Many control valve
problems turn out to be a problem somewhere else.
P S G
3 نامگذاری سایز
لوله ها : استاندارد سایزینگ شیرآالت 02
سایز نامی لوله و
قطر نامی
کالس بندی فشار
شیرآالت
P S G
3 استاندارد سایزینگ شیرآالت 02
نامگذاری سایز
لوله ها :
سایز نامی لوله و
قطر نامی
P S G
3 استاندارد سایزینگ طول شیرآالت 02
P S G
3 استاندارد سایزینگ طول شیرآالت 02
P S G
با تشکر از توجه شما
P S G