Professional Documents
Culture Documents
Subject
Problem/ Complaint
Speed sensor (speedometer) signal wire was loosen and IECU abnormal.
Symptom
When vehicle is driven; speedometer’s pointer is not played and exhaust brake function also can’t operate.
Firstly checked fault code; no fault. So enter IECU gauge test, all gauge are good. Then checked speed sensor wiring;
VECU to SP socket, SP socket to speed sensor. Wiring was good. Then changed speed sensor from another truck.
Tested the truck, not ok. Checked speed sensor and SP socket. SP socket pin were loosen. Repaired it and tested the
truck. Exhaust brake function was can be operated but millage not operated. So checked IECU gauge test again, now
millage gauge not operated. IECU millage gauge was abnormal. Disassembled IECU and cleaned gauge contact points.
Then tested IECU, all functions were good, problem was finished.
Analysis
The speed sensor is mounted on gear box output shaft. This sensor provides a speed signal to the vehicle electronic
control unit (VECU). VECU pin PB 25 is voltage supply cable to tachometer sensor pin no 1. Supply Voltage is (6.5V-
9V). VECU pin PB 6 is signal cable from tachometer sensor pin no 3. Tachometer sensor pin no 3 is ground cable.
(Remark; This truck is without tachograph, so VECU and speedometer sensor are directly connected with cable.)
Disclaimer : This Technical Service Bulletin (including any attachments)contains service information intended for dealer's service activity and is
protected by company policy. If you are not the intended recipient, you should not receive this bulletin & are hereby notified that any disclosure,
copying or distribution of this bulletin, or taking of any action based on it, it is strictly prohibited
01-000-TD-FRM-017-00
TECHNICAL SERVICE BULLETIN
Manufacturer Machine Type Series Engine Model Job Order No
VOLVO TRUCK FM400 D13A
TSB Number Bulletin Type FGI Date
Troubleshooting
Other Service Job 29.6.2015
Knowledge Sharing
(4)Sensor fault.
(5)Connector resistance and oxidation in signal wire.
Picture
Site Photo
Machine Application
Disclaimer : This Technical Service Bulletin (including any attachments)contains service information intended for dealer's service activity and is
protected by company policy. If you are not the intended recipient, you should not receive this bulletin & are hereby notified that any disclosure,
copying or distribution of this bulletin, or taking of any action based on it, it is strictly prohibited
Failure Location Photo Site Photo
01-000-TD-FRM-017-00
TECHNICAL SERVICE BULLETIN
Manufacturer Machine Type Series Engine Model Job Order No
VOLVO TRUCK FM400 D13A
TSB Number Bulletin Type FGI Date
Troubleshooting
Other Service Job 29.6.2015
Knowledge Sharing
Picture
Failure Location (Close Up Mode)
Disclaimer : This Technical Service Bulletin (including any attachments)contains service information intended for dealer's service activity and is
protected by company policy. If you are not the intended recipient, you should not receive this bulletin & are hereby notified that any disclosure,
copying or distribution of this bulletin, or taking of any action based on it, it is strictly prohibited
01-000-TD-FRM-017-00
TECHNICAL SERVICE BULLETIN
Manufacturer Machine Type Series Engine Model Job Order No
VOLVO TRUCK FM400 D13A
TSB Number Bulletin Type FGI Date
Troubleshooting
Other Service Job 29.6.2015
Knowledge Sharing
Prepared By
Name Position
Complete data
Complete step
Analysis
Name :
Suggestion for Corrective Action
New idea
Disclaimer : This Technical Service Bulletin (including any attachments)contains service information intended for dealer's service activity and is
protected by company policy. If you are not the intended recipient, you should not receive this bulletin & are hereby notified that any disclosure,
copying or distribution of this bulletin, or taking of any action based on it, it is strictly prohibited
01-000-TD-FRM-017-00
TECHNICAL SERVICE BULLETIN
Manufacturer Machine Type Series Engine Model Job Order No
VOLVO TRUCK FM400 D13A
TSB Number Bulletin Type FGI Date
Troubleshooting
Other Service Job 29.6.2015
Knowledge Sharing
Commented by :
Disclaimer : This Technical Service Bulletin (including any attachments)contains service information intended for dealer's service activity and is
protected by company policy. If you are not the intended recipient, you should not receive this bulletin & are hereby notified that any disclosure,
copying or distribution of this bulletin, or taking of any action based on it, it is strictly prohibited
01-000-TD-FRM-017-00