Professional Documents
Culture Documents
Sl/No Instrument/Tools Materials Number 1 2 3 4 5
Sl/No Instrument/Tools Materials Number 1 2 3 4 5
Procedure
Check the choke for its short and open with test lamp(in fig 1).
Then we go for assembling fluorescent tube accessories in the fitting base as shown in the
fig 3.
.Connect the accessories as shown in the fig4 for single tube light and also install the
tested starter.
Test the filament on both sides of the fluorescence tube for its continuity as shown in
fig5. Then discard the fluorescence tube with open or fused filament in either side
Now fix the bulb in the holder.
1. We should make sure that inner part of holder is in proper position and then go for
inserting the both the ends of the fittings on either side of the tube.(fig 6)
2. Push the socket pins to the fitting.
Fig 6