This report summarizes concrete compressive strength testing according to NF EN 12390-3 standards. Three concrete cylinders poured on November 26, 2023 from a batch plant in Loudima, Congo were tested for compressive strength after 8 and 29 days. The test results will be used to ensure the concrete meets design specifications for use in a silo ventilation channel wall. The report documents the mix design, testing procedures, and compressive strength results but does not state the actual strength values.
This report summarizes concrete compressive strength testing according to NF EN 12390-3 standards. Three concrete cylinders poured on November 26, 2023 from a batch plant in Loudima, Congo were tested for compressive strength after 8 and 29 days. The test results will be used to ensure the concrete meets design specifications for use in a silo ventilation channel wall. The report documents the mix design, testing procedures, and compressive strength results but does not state the actual strength values.
This report summarizes concrete compressive strength testing according to NF EN 12390-3 standards. Three concrete cylinders poured on November 26, 2023 from a batch plant in Loudima, Congo were tested for compressive strength after 8 and 29 days. The test results will be used to ensure the concrete meets design specifications for use in a silo ventilation channel wall. The report documents the mix design, testing procedures, and compressive strength results but does not state the actual strength values.