Professional Documents
Culture Documents
Chapter 2.1 - Decision Making Techniques مترجم
Chapter 2.1 - Decision Making Techniques مترجم
1
Decision Making Techniques
تقنيات اتخاذ القرار
Question: 1
• Hint : The Product with higher contribution per machine hour should
be selected
• يجب تحديد المنتج ذو المساهمة األعلى لكل ساعة ماكينة:تلميح
Limiting Factor Decision
With One Limiting Factor
Question: 2
• A company is producing three products A, B and C. The following information is available
related to the three products.
• تتوفر المعلومات التالية المتعلقة بالمنتجات الثالثة.)تقوم إحدى الشركات بإنتاج ثالثة منتجات (أ) و(ب) و(ج.
Question: 3
• A company is producing three products P, Q and R. The following
information is available related to the three products.
Product Product Product
P Q R
Direct Material @ OMR 1.5 per Kg 3 1.5 4.5
Direct Labour 3 2 2
Variable Overheads 100% of Direct labour
Selling Price 11 6 13
Estimated demand ( in Units) 150 200 400
• Solution :
• Here shirts A and B are problem variables. : حل
دع. هي متغيرات المشكلةB وA هنا القمصان
Let the store stock المخزون في المتجر
• ‘x’ units of A and ‘y’ units of B. .B " منy" ووحداتA " منx" وحدات
2 -/ هيB وA نظًر ا ألن مساهمة الربح لكل من
• As the profit contribution of A and B are فإن، لاير عماني على التوالي5/-لاير عماني و
OMR 2/- and OMR 5/- respectively, Z = 2x + 5y تعظيم:الوظيفة الهدف
Objective Function : Maximize Z = 2x + 5y : قيود
لقدرة المبيعات وy ≥ 300 وx ≥ 400
• Constraints : . لسعة التخزينx + y ≥ 600
.0 ≥ هماy وx وقيد عدم السلبية هو أن
• x ≤ 400 and y ≤ 300 for sales capacity and
• x + y ≤ 600 for storage capacity.
• And non-negativity constraint is both x and
y are ≥ 0.
Question: 5
• High Quality furniture Ltd. Manufactures two products, بتصنيعHigh Quality Furniture Ltd تقوم شركة
tables & chair. Both the products have to be processed يجب معالجة كال المنتجين من. الطاوالت والكراسي،منتجين
through two machines M1 & M2 the total machine- ويبلغ إجمالي ساعات الماكينة،M2 وM1 خالل جهازين
hours available are: 200 hours of M1 and 400 hours of . على التواليM2 ساعة من400 وM1 ساعة من200 :المتاحة
M2 respectively. Time in hours required for producing a الوقت بالساعات الالزم إلنتاج كرسي وطاولة على كال
chair and a table on both the machines is as follows: :الجهازين هو كما يلي
• Time in Hours
الوقت بالساعات
Machine Table Chair
M1 7 4
M2 5 5 20 لاير عماني ومن الكرسي40 الربح من بيع الطاولة هو
• Profit from the Sale of table is OMR 40 and that from a .LP قم بصياغة ما ورد أعاله كمشكلة.لاير عماني
chair is OMR 20. Formulate the above as a LP problem.
Question: 5
• Solution :
• Here tables and chairs are problem variables.
• ‘x’ : No. of tables and ‘y’ No. of chairs. As the profit on table and
chair is OMR 40 and OMR 20 respectively,
• Objective Function : Maximize Z = 40x + 20y
• Constraints :
• M1 7x+4y ≤ 200
• M2 5x+5y ≤ 400
• And non-negativity constraint is both x and y are ≥ 0.
Question: 6
• A company manufactures two products, X and Y by using three A باستخدام ثالث آالتY وX ،تقوم إحدى الشركات بتصنيع منتجين
ساعات خالل4 بقدرة إنتاجية تصل إلىA تتمتع اآللة.C وBو
machines A, B, and C. Machine A has 4 hours of capacity
خاللC وB فإن السعة المتاحة لآلالت، وبالمثل.األسبوع القادم
available during the coming week. Similarly, the available تتطلب وحدة. ساعة على التوالي35 ساعة و24 األسبوع القادم هي
capacity of machines B and C during the coming week is 24 ،B ساعات من اآللة3 و،A ساعة واحدة من اآللةX واحدة من المنتج
hours and 35 hours respectively. One unit of product X requires
Y تتطلب وحدة واحدة من المنتج، وبالمثل.C ساعات من اآللة10و
علىC و،B و،A ساعات من اآللة7 و، ساعات8 و،ساعة واحدة
one hour of Machine A, 3 hours of machine B and 10 hours of فإنها تحقق ربًحا، في السوقX عندما يتم بيع وحدة واحدة من.التوالي
machine C. Similarly one unit of product Y requires 1 hour, 8 . لاير عماني لكل وحدة7 هوY لاير عماني لكل منتج وربح5 قدره
hour and 7 hours of machine A, B and C respectively. When one قم بحل المشكلة باستخدام الطريقة الرسومية للعثور على مزيج المنتج
.األمثل
unit of X is sold in the market, it yields a profit of OMR 5/- per
product and that of Y is OMR 7/- per unit.
• وحدة من المنتج1.6 ومن ثم فإن الحل األمثل للمشكلة هو أنه يتعين على الشركة تصنيعX وحدة من المنتج2.4 وY، حتى تتمكن من تحقيق ربح
لاير عماني في فترة التخطيط24.80 أقصى قدره.
Slack and Surplus
الركود والفائض
Slack occurs when maximum availability of a
resource is not used. Slack is the amount of
unused resource or constraint, where the هوSlack .يحدث الركود عندما ال يتم استخدام الحد األقصى من توفر المورد
constraint is a ‘less than or equal to’ ." حيث يكون القيد قيد "أقل من أو يساوي،مقدار المورد أو القيد غير المستخدم
constraint.
،إذا كان مقدار الموارد المستخدمة في الحل األمثل أقل من حجم الموارد المتاحة
If at the optimal solution, the amount of the .فهناك سعة احتياطية للمورد تسمى بالركود
resources used is less than the amount of
resources available, there is a spare الفائض هو.يحدث الفائض عند استخدام أكثر من الحد األدنى من المتطلبات
capacity for the resource which is called as ." حيث يكون القيد قيًد ا "أكثر من أو يساوي،الزيادة على الحد األدنى من القيد
slack.
Solution حل
• By substituting the optimum solution in the constraints we ومن خالل استبدال الحل األمثل في القيود يمكننا تحديد ما إذا
can determine whether the constraints are binding or .كانت القيود ملزمة أم أن هناك ركود أو فائض
there is slack or surplus. القيد ملزم- 330 = )30( 10+)10( 3 :وقت اآللة
• Machine Time : 3 (10)+10 (30) = 330 – Constraint is binding لذلك.400 وهي أقل من280 = )30(4+)10(16 :المواد الخام
. كجم من المواد الخام120 يكون هناك نقص قدره
• Raw Material : 16(10)+4(30) = 280 which is less than 400. القيد ملزم- 240 = )30(6 + )10(6 : العمل
so there is slack of 120 Kgs of raw material. وبذلك يكون هناك. 12 أي أكثر منy = 40 : إنتاج العلب
• Labour : 6(10) + 6(30) = 240 - Constraint is binding . علبة عن الحد األدنى لإلنتاج18 فائض
• Production of Tins : y = 40 which is more than 12. So there
is surplus of 18 tins over the minimum production.
Question: 9
• A manufacturer produces two products A and B, and has
ويعمل على تشغيل أجهزته،B وA يقوم أحد المصنعين بإنتاج منتجين
his machines in operation for 24 hours a day. Production ساعتين من المعالجة في اآللةA يتطلب إنتاج. ساعة يومًيا24 لمدة
of A requires 2 hours of processing in machine M1 and 6 ساعات من المعالجةB 6 يتطلب إنتاج.M2 ساعات في اآللة6 وM1
تحقق الشركة المصنعة ربًحا.M2 وساعتين في اآللةM 1 في اآللة
hours in machine M2. Production of B requires 6 hours
لاير عماني على2 لاير عماني عن كل وحدة من الوحدة (أ) و5 قدره
of processing in machine M 1 and 2 hours in machine .)كل وحدة من الوحدة (ب
M2. The manufacturer earns a profit of OMR 5 on each ما هو عدد الوحدات التي يجب إنتاجها من كل منتج في اليوم لتحقيق
أقصى قدر من الربح؟
unit of A and OMR 2 on each unit of B. .اكتشف أيًض ا ما إذا كانت القيود ملزمة أم أن هناك ركوًد ا أو فائًضا
• How many units of each product should be produced
in a day in order to achieve maximum profit?